pd070-hl2 high performance analog photodiode pd070-hl2-5xx sc receptacle pd070-hl2-5xx st receptacle features ? excellent linearity ? high responsivity ? low dark current ? dielectric passivation ? 100% purge burn-in ? planar structure applications ? analog optical receivers to 3ghz ? forward path catv optical receivers ? ftth receivers PD070-HL2-3XX sc/apc pigtail pd070-hl2-5xx fc receptacle product description the pd070-hl2 is a high performance, ingaas photodiode with a photosensitive region 70 m in diameter. it has been specifically designed for low noise, high linearity analog optical receivers operating to 3ghz. planar semiconductor design and dielectric passivation provide low noise performance. reliability is assured by hermetic sealing and 100% purge burn-in (0200c, 15 hours, vr = 20v). the device can be either pigtailed with sc, fc or st connectors (upc or apc) or mounted in an sc, st of fc receptacle. custom packages are also available. electrical characteristics table 1: electrical specifications parameter min typ max unit dark current (i d ) - 0.1 1.0 na capacitance (1) - 0.6 0.7 pf responsivity at 1310nm 0.80 0.90 - a/w responsivity at 1550nm 0.85 0.95 - a/w 3db bandwidth (75 ? bias) 2800 3300 - mhz single second order (sso) (2) - -75 -70 dbc single triple beat (stb) (2) - -85 -80 dbc optical return loss (pigtail using smf-28) 50 55 - db optical return loss (receptacle, apc connector) 40 45 - db operating voltage - 5 20 v (1) 5v bias voltage (2) sso and stb measurements to 860mhz using 2 and 3 tones at 40% omi, 0dbm optic al input, 1310nm, 12v bias.
pd070-hl2 rev 1.0 2 table 2: absolute maximum ratings parameter min max unit forward current - 5 ma reverse current - 250 a reverse voltage - 30 v optical input power - 5 mw operating case tem perature -40 +85 oc storage temperature -40 +85 oc soldering temperature (10 seconds) - +250 oc stresses in excess of the absolute ratings may cause permanent damage. f unctional operation is not implied under these conditions. exposure to absolute ratings for extended periods of time may adversely affect reliability. pin locations ? standard dimensions: inches [mm] ordering information table 3: standard part number options pd070-hl2-300 sc/apc pigtail, 1 meter smf-28 fiber, 3 pin pd070-hl2-520 sc/apc receptacle, 3 pin table 4: custom part number options PD070-HL2-3XX number of pins: 2, 3 fiber length: 0.5 meter, 1.0 meter fiber type: single mode (smf-28) or custom supplied connector type: sc, st or fc. apc or upc pd070-hl2-5xx number of pins: 2, 3 connector type: sc, st or fc. aligned for apc or upc please contact anadigics for the specific part number and pinout that suits your needs anadigics, inc. 829 flynn road camarillo, california 93012, u.s.a. tel: +1 (805) 445-4500 fax: +1 (805) 445-4502 url: http://www. anadigics.com e-mail: mktg@anadigics.com i mportant notice anadigics, inc. reserves the right to make changes to its pr oducts or discontinue any product at any time without notice. t he product specificat ions contained in advanced product information sheets and preliminary data sheets are subject to change prior to a product?s formal intr oduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibility for inaccura cies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. warning anadigics products are not intended for use in life support appliances, devices, or systems. use of an anadigics product in any su ch application without written consent is prohibited.
|
